Screen replacement
Bonded OLED, with the fingerprint sensor underneath.
Nine times in ten this starts as compacted lint stopping the cable seating fully, and we check and clean before we quote anything bigger.
If the connector itself has worn out, it's soldered to the board — so it comes off and a new one goes on under the microscope.
That's the port or its data lines — wireless skips the connector entirely. Generally good news for a clean repair.
It contributes. Poor cables wear the contacts faster and at worst push voltage the port wasn't built for.
Bonded OLED, with the fingerprint sensor underneath.
Glued in, often under the wireless coil.
Including the camera bar, which cracks on corner drops.