iPhone · Board-level · Hialeah & Miami Lakes, FL

iPhone won't charge

Before you pay anyone anything: it's very often just lint.

We clean and check firstBoard-level if it's neededHonest answer either way Most repairs same day

Years of pocket fluff compacts into the bottom of the connector and stops the cable seating properly. We check and clean first, and if that's all it was, that's what we'll tell you.

If the port itself has actually failed, that's board work — the connector is soldered on, so it comes off and a new one goes on under the microscope.

Symptoms

What a failing port looks like

  • Only charges if you bend or hold the cable a certain way
  • Charges slowly, or stops and starts on its own
  • Won't charge by cable but works fine on a wireless pad
  • Your computer doesn't see the phone any more
Useful to know

Questions we get

Wireless charging works but the cable doesn't. What does that tell you?

That it's the port or its data lines, because wireless bypasses the connector entirely. It's usually good news — a clean, contained repair.

Could it be the cable?

Easily. Try a different cable and a different plug before you come down. We'd rather you saved the trip.

Someone told me it's just a part you clip in.

Not on an iPhone. It's soldered to the logic board and comes off with hot air under a microscope. Whatever video you saw was a different phone.

Also on iPhone

Other iPhone jobs

Cable being temperamental?

Bring it in — quite often it's just lint, and a clean is the whole fix.

Get it looked at →